CASE SR160 Skid Steer Loader

Perfect for the agricultural, rental and landscape markets, the CASE SR160 skid steer has a compact chassis making tight spaces easier to work in. This machine has an extremely low overall height, making it easy to transport with a trailer. New Tier 4 technology combined with cutting-edge engineering makes the SR160 the best in its class.

Ideal For:

GET SONSRAY QUOTE
case sr160

CASE SR160 FEATURES

Productivity

Built with more torque and power, the SR160 comes with a power stance wheelbase to optimize dynamic stability while increasing maneuverability and clearance over curbs. New electronic control module and fuel system can log operating data and have CAN-bus capabilities for easy diagnostic monitoring.

Fuel Efficiency

With more power and better fuel efficiency, the new Tier 4 engine uses CEGR technology to meet emissions regulations and maximize performance.

Comfort and Visibility

The cab forward design along with a thin-wire side screen and standard skylight help to increase visibility from sunrise to sunset.

Serviceability

Eliminate downtime with maintenance checks made easy. All service checks are conveniently located at the rear of the machine, while the tilting cab provides easy access for repairs.

CASE SR160 STANDARD EQUIPMENT

Engine

  • ISM N844L-F diesel
  • 135.2 CID (2.2 L) Turbo
  • Tier 4 Final Certified
  • Spark Arresting Diesel Particulate Filter (DPF) muffler
  • Charged Air Cooler (CAC)
  • Indirect fuel injection
  • Horsepower: Gross: 60 hp (44.7 kW), Net: 57 hp (42.4 kW), Peak torque: 139 lb·ft (188 N·m)
  • 120 amp alternator
  • Dual element air cleaner
  • Organic Acid Technology (OAT)
  • Anti-freeze solution to -34º F
  • Fuel tank – 16 gal (U.S.)
  • Over and under radiator and oil cooler
  • Single plane, top and bottom oil cooler/radiator configuration
  • Glow plugs
  • Integral engine oil cooler
  • Fuel filter with water trap
  • 925 CCA 12V battery
  • Master electrical disconnect

Drivetrain

  • 1-speed hydrostatic four wheel drive
  • ASA #80 drive chain
  • SAHR disc parking brake

Hydraulics

  • Auxiliary hydraulics: @ 3,050 psi (210 bar) – 18.4 gpm (69.7 L/min)
  • 6 micron oil filtration system
  • 3-spool loader control valve
  • Auxiliary hydraulic disconnects, ISO flat-face – connect-under-pressure with case drain
  • Hydraulic circuit pedal lock
  • Auxiliary function lockout override
  • Loader lift lockout override
  • Heavy-duty hydraulic oil cooler
  • Loader arm float position
  • Loader function lockout system

Operator Environment

  • ROPS/FOPS Level 1 canopy w/ side screens
  • Keyed start ignition
  • Tilt ROPS/FOPS
  • Rear window w/ emergency escape
  • Suspension Seat, vinyl w/ 2 in (51 mm) retractable 3 point lap seat belt
  • Hand and foot throttle
  • Alarm package – back-up and horn
  • Headliner
  • Dome Light
  • Top window
  • Cup holder
  • 12V Power plug socket
  • Foot rest
  • Seat pocket
  • Padded seat bar w/ integral armrests
  • Loader control lockout system
  • Electric parking brake control
  • Operator’s compartment floor cleanout
  • Proportional auxiliary hydraulic control – on joystick
  • Advanced Instrument Cluster w/: Digital hour meter, Tachometer, Fuel level LCD bar graph w/ alarm, Diagnostic features, Security lockout
  • Warning lights with alarms: Engine coolant temperature, Engine oil pressure, Engine malfunction, Hydraulic charge pressure, Hydraulic filter restriction
  • Hydraulic oil temperature: Critical system stop, Engine system, Hydraulic system, Electrical and diagnostic system
  • Warning alarms: Battery voltage – plus display, Oil service
  • Indicator light: Engine preheat, Parking brake, Seat bar reminder

Loader

  • Manual attachment coupler
  • Radial lift geometry
  • Loader lift arm support strut
  • SAE operating load: 1,600 lbs
  • Tipping load: 3,200 lbs

Tires

  • 10 X 16.5 Heavy duty – 59 inch
  • Over-the-Tire Width (OTW)
  • Galaxy XD2002

Other Standard Features

  • Halogen lights – 2 front, 2 side, 2 rear flood
  • Heavy duty front lights
  • Pre-wired for rotating beacon
  • Lockable service access hood
  • Single-point daily service
  • Rear tail lights
  • Remote oil drain
  • Remote oil and fuel filters
  • Block heater
  • Debris ingression sealing
  • Mounting points for add-on counterweights

CASE SR160 OPTIONAL EQUIPMENT

Hydraulics

  • Second auxiliary hydraulic
  • Hydraulic one-way self-leveling
  • Ride control

Loader

  • Auxiliary front electric control
  • Hydraulic attachment coupler

Other

  • Language decals
  • Factory-installed tires
  • Buckets
  • Bolt-on bucket cutting edges
  • Bolt-on heavy-duty bucket spill guard
  • Special paint
  • Offsite service arrangement
  • Telematics

Operator Environment

  • Enclosed cab: Fully sealed and pressurized – FSP, Glass door with wiper and washer, Sliding side windows – removable, Ventilation system with integrated heater, AM/FM radio with 2 speakers, Keyless start ignition, Control lockout system
  • Electro-hydraulic controls: For drive/steering, loader functions, Switchable between H and ISO patterns, Adjustable sensitivity of controls
  • Mechanical hand controls
  • Hand and foot controls: Hand controls the loader drive function and foot controls the bucket and boom
  • Non suspension seat
  • Deluxe cloth, air suspension seat, with heater and lumbar support
  • Open cab interior trim package
  • Demolition cab door with polycarbonate
  • FOPS level 2

Factory Supplied Attachments

  • Interior mirror
  • Add-on counterweights
  • Road lights
  • Rotating beacon
  • Four-corner LED strobe
  • Bolt-on heavy-duty bucket teeth
  • 48 in (1.22 m) pallet forks

Service Parts

  • 3 inch (76.2 mm) retractable seat belt
DOWNLOAD FULL INFO PDF

INTERESTED IN LEARNING MORE ABOUT THE CASE SR160?

Our experienced staff are ready to discuss your new equipment needs. Reach out below to discuss a quote request!

  • This field is for validation purposes and should be left unchanged.